View Single Post
Old 11-29-2022, 09:28 PM   #19
gtrmaster88   gtrmaster88 is offline
 
Join Date: May 2011
Location: Morehead, Ky
Posts: 20
Quote:
Originally Posted by Thumper View Post
It would be highly unusual if it were sent jetted rich. You probably got a #40 pilot jet, and #120 main jet. These are probably OK at higher elevations. If you are below 1000 feet, those are on the lean side.

Red hot pipe is more likely to be a sign of lean jetting. Rejetting this carb is covered in the 2022 1/2 Templar X thread in the pics and video section.
To be honest I had never thought about elevation but according to a quick online search, Morehead Kentucky where I reside (across the country from ol' Cali where this bike came from), I'm at 738' above sea level. So I'm sure you're probably right. Probably need to re-jet. Is there a link or place online you all would suggest for ordering the correct jets to fit the PE28?


 
Reply With Quote