ChinaRiders Forums - View Single Post - Working With Diagnostic Data Cable & Software

motoshop · 02-11-2021, 04:13 AM

Posplayr,

thanks for the reply. My cable is original VAG K-line cable +€200,- so i wont think this could be the problem, still waiting on my openport. I found that the pin-out from different brands of scooter on the obd connector is different. Some use only 4 pins K-line, some 3 etc. If anybody needs extra background info to help let me know.

Also working on the bullit series 125cc with succes in remapping.

Looking for a way to extract .bin from bosch mse 6.0m for the zontes G125, U125, U-1 125, CF moto 650 series.

Greetings

02-11-2021, 04:13 AM	#212
motoshop Join Date: Feb 2021 Posts: 3	Posplayr, thanks for the reply. My cable is original VAG K-line cable +€200,- so i wont think this could be the problem, still waiting on my openport. I found that the pin-out from different brands of scooter on the obd connector is different. Some use only 4 pins K-line, some 3 etc. If anybody needs extra background info to help let me know. Also working on the bullit series 125cc with succes in remapping. Looking for a way to extract .bin from bosch mse 6.0m for the zontes G125, U125, U-1 125, CF moto 650 series. Greetings
	1