Hi, I assembled the engine but notice the cam chain tensioner is diferent from Spud´s one and that mentioned in tw200 service manual. I wonder if mine is incomplete since it does not have the bolt that spud´s tensioner has.
Also, I learned that the chain is very tight when installing the tensioner. I am confused since tw200 service manual recommends a 0.5 mm of tensioner rod position. Mine is about 0.11 mm and can´t adjust it ´til 0.5 mm. The next video shows the difference in tension when releasing the spring (tension cam chain) and when the spring is compressed (loose cam chain)
In other words, the tensioner can´t be adjusted.
