Quote:
Originally Posted by Working_ZS
You could have exhaust valves that need adjustment, but that isn't the only thing that can cause stalling. Some things to check:
1.) Make sure that spark plug boot is fully seated on the spark plug.
2.) Try changing the spark plug to a Denso or NGK Iridium plug. The RX3 takes a NGK CR8E plug as standard, you can upgrade to a NGK CR8EK or CR9EK, where the 'K' denotes a double versus a single ground electrode plug; the Iridium variants are CR8EIX and CR9EIX, both of these are single ground electrode plugs with Iridium center electrodes.
3.) Put some Lucas Fuel Injection Cleaner and Upper Cylinder Lubricant in your gas tank, or something equivalent if it isn't available in your area.
These are just the top three, you can check out CSC's blog about RX3 stalling here for some more things to check:
http://californiascooterco.com/blog/?p=24180 |
Replaced spark plug with CR8EIX Done
Redx fuel injection cleaner always used.
I will check the valves today as the weather in UK it's finally friendly enough :-)
Let you know if I get around it
Thank you all :-)