ChinaRiders Forums - View Single Post

SGCSCRX3 · 05-19-2021, 01:07 PM

Well at close to 3,500 miles I figured I would give them valves a check. First owner did the first 500 mile check. All seemed good for my first time doing this. Intakes were good ...Exhaust was slightly tighter so I adjusted them slightly. I have them to the .006 -.008 spec. This is my first time doing this so I am putting it back together and test ride time. I didn't pull the gas tank just in bolted and lifted aside. Also I unbolted the abs and pushed it out of the way to gain access to the exhaust valve cover. Otherwise I follwed the instructions per CSC site.

05-19-2021, 01:07 PM	#1
SGCSCRX3 Join Date: Nov 2020 Location: Wisconsin Posts: 47	Adjusting valves today. Well at close to 3,500 miles I figured I would give them valves a check. First owner did the first 500 mile check. All seemed good for my first time doing this. Intakes were good ...Exhaust was slightly tighter so I adjusted them slightly. I have them to the .006 -.008 spec. This is my first time doing this so I am putting it back together and test ride time. I didn't pull the gas tank just in bolted and lifted aside. Also I unbolted the abs and pushed it out of the way to gain access to the exhaust valve cover. Otherwise I follwed the instructions per CSC site.
	0