[SpudRider]

Originally Posted by hect75

The stripped bolts are those holding the carb bowl. I used the dremel and flat screwdriver to take them off. I removed the main jet and took it to the shop but nobody sells this guy. On the other hand, Honda (according to Spud's suggestion) sells the oil seal fork for $30 each one which I think is very expensive. Is there another model or what about the seals that use the TW200? maybe they're cheaper than the Honda ones.

Your Zongshen forks are very different from Yamaha TW200 forks. Therefore, you can't use TW200, fork oil seals. As I documented in my fork oil thread, the Zongshen, fork oil seals have the following dimensions.

http://www.chinariders.net/showthread.php?t=10266

Outside diameter: 50 mm
Inside diameter: 37 mm
Thickness: 11 mm

Besides getting the fork oil seals for the '09 Honda CRF150R, you can also purchase the Zongshen, fork oil seals from Taobao.

As I detailed in my carburetor jet thread, you Teikei MV28 carburetor can use Mikuni N102/221, main jets, which you can purchase from Rocky Mountain ATV.

http://www.chinariders.net/showthread.php?t=6501

http://www.rockymountainatvmc.com/p/...in%20jet%20150