Quote:
Originally Posted by FastDoc
I just powerwashed it and it cleaned up real nice. 8)
I need data gentlemen. :idea:
Which oil filter? What are the valve clearance specs? I assume I set them the same as Spud's Zong tutorial.
I'll pull the battery and put in on the charger and hope for the best. If I confirm there's no spark, which I expect, I'll get a new CDI and start from there.
I'll change the brake fluid, replace the gas, set the valves, fix a crack on the inner rear fender, check the electrics, oil and adjust the chain, and get her ready to run.
It seems to be a fine machine. So far the build quality is the equal of Q or a Zong GY or any inexpensive japabes machine.
|
Are you sure you want to take on another project bike, Brother Bill? :roll: :?: I will be glad to take this bike off your hands, and pay you an additional $25 for your time, gasoline, et cetera.
![Laughing](images/smilies/cwmww27.gif)
The
Zongshen Sticky in the Dual Sport Forum is your new, best friend, Doc!
![Wink](images/smilies/windfk.gif)
Oil filter information, valve clearance specs, et cetera, should be exactly the same for your 230cc Zongshen engine.
http://chinariders.net/modules.php?n...ewtopic&t=8673
It also appears you might have the same, inverted forks as my Zongshen 200GY-2. Please take off the seat, and the plastic; I would love to see photos of your naked Zong! Take it off! Take it
all off! :oops: :roll:
I think you might also have the same Teikei, MV28 carburetor as my 200GY-2. I would love to see photos of the airbox, as well.
![Grin](images/smilies/smiledfy_emoticons_xd.gif)
Welcome back to The Collective, Billcutus of Zong! We missed you!
![Grin](images/smilies/smiledfy_emoticons_xd.gif)
Resistance was futile. You
have been reassimilated! 8)
Spud
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
![Wink](images/smilies/windfk.gif)
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894