View Single Post
Old 01-19-2010, 10:32 AM   #2
fishman10   fishman10 is offline
 
fishman10's Avatar
 
Join Date: Sep 2008
Location: central PA
Posts: 770
zong jets,,,,

eureka!! so following spuds advice, I took the top of the carb without removing it and put the clip back up one notch were it was ,,,but i left the 137.5 jet in cause the others haven't come in yet.It is amazing that one small adjustment has made it run good again,granted it may still be rich ,I'll have to do a plug check but it ran well, no breaking up at higher rpms and very very little pop on deceleration.


 
Reply With Quote