ChinaRiders Forums - View Single Post - New project. Maybe this one will finish. Lifanuki

katoranger · 08-05-2008, 09:01 PM

Okay. I did alittle slobberin before being called in.

I effectively raised the rear mount about 3/4" and found a piece of tubing that fits snugly on the swingarm bolt. Got this welded in place and the rear mount for the subframe is in place. This lines up the countershaft sprocket in the right place for the rear sprocket and at the right height to clear the swingarm.

No picture tonight. Too dark. Hope to have the motor in place tomorrow.

Allen

08-05-2008, 09:01 PM	#14
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Okay. I did alittle slobberin before being called in. I effectively raised the rear mount about 3/4" and found a piece of tubing that fits snugly on the swingarm bolt. Got this welded in place and the rear mount for the subframe is in place. This lines up the countershaft sprocket in the right place for the rear sprocket and at the right height to clear the swingarm. No picture tonight. Too dark. Hope to have the motor in place tomorrow. Allen __________________ You meet the nicest people on a Honda Clone.
	0