ChinaRiders Forums - View Single Post - New project. Maybe this one will finish. Lifanuki

katoranger · 08-01-2008, 07:59 PM

Okay I got the original motor out of the frame and did alittle test fitting etc.

I think this will work.

I am going to have to cut the down tube off to clear the head and then I think I am going to make a lower mount using the peg adapter I bought for the CT project and attach it to one of the stock locations. This will get the correct location and alignment of the sprocket.

From there I will use some scrap metal to make mount to the two main motor mounting points on the engine. I am going to make a frame cradle using the original honda CT skidplate to tie the frame together.

This will be fun.

Allen

08-01-2008, 07:59 PM	#2
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Okay I got the original motor out of the frame and did alittle test fitting etc. I think this will work. I am going to have to cut the down tube off to clear the head and then I think I am going to make a lower mount using the peg adapter I bought for the CT project and attach it to one of the stock locations. This will get the correct location and alignment of the sprocket. From there I will use some scrap metal to make mount to the two main motor mounting points on the engine. I am going to make a frame cradle using the original honda CT skidplate to tie the frame together. This will be fun. Allen __________________ You meet the nicest people on a Honda Clone.
	0