Quote:
Originally Posted by Thumper
I found that my original starter had an internal grounding issue. But it was easy to fix. The brush plate was just barely contacting the rotating armature. This was a typical QC issue! I discovered this when I opened up the starter. Some light grinding with the dremel on the tip of the armature and the end of the brush plate was all it took. I lubed the bushing on both ends and reassembled it. It has worked perfectly since. Don't throw that starter out!
|
Thumper,
Did you open the starter from the left side of the bike? or do I need to take the entire starter out and try to pull it all apart?