ChinaRiders Forums - View Single Post

katoranger · 06-15-2008, 09:04 PM

I used some j-shaped bolts found at tractor supply I think.

Just hooked them around the factory rack. Two at the back and one at the front.

Required about 2 minutes of drilling and I used a grinder to cut the excess off the bolts.

Allen

06-15-2008, 09:04 PM	#14
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I used some j-shaped bolts found at tractor supply I think. Just hooked them around the factory rack. Two at the back and one at the front. Required about 2 minutes of drilling and I used a grinder to cut the excess off the bolts. Allen __________________ You meet the nicest people on a Honda Clone.
	0