Quote:
Originally Posted by China Rider 27
I had a similar problem while back with a cooler. I think the issue was the sump adapter plastic gasket was not sealing which allowed the oil pump to pull oil from the sump and bypass the the cooler. Those long adapter connectors need to be in a certain place to come straight out the front but sometimes it seems the adapter could use some more turning to seal. I used some 5/16 or 8 mm ID hose and new banjos to fix it.
|
Im hoping the AN6 banjo will make do on the supplied lines.
I made a complaint regarding the paint and rusty bolts to the seller and I'm am lead to believe they are sending another full replacement order...well see if that happens...I've had sellers make that statement but nothing gets sent.
I put my finger over the suction inlet on the bypass adapter and it was pulling suction...so I believe it was just an air pocket that passed and lost prime. So i think the bypass was installed correctly and making an internal seal.
Trying an image host share. Saturday afternoon chain clean, wipe down and nip up.
https://imgbb.com/tLM3F1M