|
The length seems right. If the shock was still in one piece (spring in place) and that ~18.25 inches is from center to center (mounting holes), that is 463mm.
Questions:
-Are those 10mm bolt holes?
-What is the width of the upper bushing (22mm on the KKE adjustable shock) ?
By width, I mean the length of the bushing, width when mounted. That is the critical measurement.
-What is the width between the two legs of the lower mounting fork? It is 20mm on the KKE shock (to fit when mounted to the linkage triangle).
The spring isn't too wide, no problem there. The upper mount doesn't move significantly and sufficient clearance to mount.
If those dimensions are OK. the ONLY real issue is whether there is room for the ballonet. It is not perpendicular to the upper shock mount, but rather, angles back slightly.
I am ordering a new one, so I can send you this one. But I wouldn't recommend buying it from me, because even if it fits, you should make it a ~5/8" distance to the new mounting hole, not 1 inch. And it isn't worth sending just for fitment test.
|