Got the rotary tool and carbide bur bit and made an notch in the bracket that supports the Honda cable break out box.
Made enough clearance without any major structural impact for the main Loom to slip in between and up into the lamp bucket.
Added a cable tie for its name sake to help prevent the loom from chaffing with long term left to right turns.
Seems to have worked out well and the loom doesn't kink up and loop over the stem steering lock like before...
Also cut the ends of the lamp lens guard to make it a slip install as the closed bolt hole ends made install very difficult otherwise...
So the glass lens should be safe now (touch wood)
This basically completes the primary build as intended.
