ChinaRiders Forums - View Single Post - Front Wheel Bearings

herbie · 07-11-2022, 01:43 PM

If you can’t get to the race from the other side then they do make expander tools for pulling bearings out but if your frugal like me you make one. I just replaced both front and rear wheel bearings on my goldwing. If you have a bolt laying around close to the diameter of the axle then cut a split in the bolt. Slide the bolt through the bearing and insert a punch or beatable screwdriver into the split and it grabs the bearing and pulls it out. I can take a picture of it when I get home if you like.

07-11-2022, 01:43 PM	#2
herbie Join Date: May 2019 Location: Illinois Posts: 864	If you can’t get to the race from the other side then they do make expander tools for pulling bearings out but if your frugal like me you make one. I just replaced both front and rear wheel bearings on my goldwing. If you have a bolt laying around close to the diameter of the axle then cut a split in the bolt. Slide the bolt through the bearing and insert a punch or beatable screwdriver into the split and it grabs the bearing and pulls it out. I can take a picture of it when I get home if you like. __________________ 2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681
	2