View Single Post
Old 07-04-2022, 12:15 PM   #2
JFOlivier   JFOlivier is offline
 
JFOlivier's Avatar
 
Join Date: Nov 2020
Location: Northern Neck of Virginia.
Posts: 164
The X-Pect manual shows the handle of the valve turned 180 degrees from off to on but also runs at 90 degrees from off, I have also pondered this and have wondered if there was a reserve on the fuel tank although it is not mentioned. I guess the only way to find out is let the fuel run low, remove the hose and let the tank run dry, then move it to the 90 degree setting and see if more fuel comes out. If no more fuel comes out pour the fuel back into the tank and drain it through the 90 degree position until it stops and then switch to the 180 degree position and see if more comes out. My tank is pretty full at the moment so it will be a while before I can try that.
John


 
Reply With Quote