ChinaRiders Forums - View Single Post

**cheesy** · 03-08-2022, 08:45 AM

I do know that a semi local guy fabs a single carb intake for the older wings.

Check the drive splines on the rear wheel for wear. The replaceable coupler on the rear wheel will wear quickly if reinstalled with the slightest bit of mis-alignment. My almost brother in law can tell you all about that.

Also, the plenum o-rings tend to dry rot and are hard to find replacements for. They are a square profile. I made a bunch for my buddy in Finland out of Viton fuel line for his 83. I still have that piece fuel if you find you need any.

03-08-2022, 08:45 AM	#6
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,836	I do know that a semi local guy fabs a single carb intake for the older wings. Check the drive splines on the rear wheel for wear. The replaceable coupler on the rear wheel will wear quickly if reinstalled with the slightest bit of mis-alignment. My almost brother in law can tell you all about that. Also, the plenum o-rings tend to dry rot and are hard to find replacements for. They are a square profile. I made a bunch for my buddy in Finland out of Viton fuel line for his 83. I still have that piece fuel if you find you need any. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0