|
There's a chunk of metal welded in between the rails of the luggage rack on the side, with bolt holes drilled in it. This makes a bracket on the luggage rack.
I have a 15/16ths threaded rod that I cut up. I have a nut and washer on each side of this that secures it to the luggage rack bracket.
The other end of the 15/16ths rod is welded to some scrap metal that my cousin had lying around. That's the bracket that the bags attach to. There are 4 8mm bolts, one in each corner of that bracket, that secure the bag to that bracket.
To quickly remove the bags, I remove the 15/16ths nuts from the luggage rack bracket. It's a very effective/quick setup.
Any more questions? Was that clear?
|