https://youtube.com/shorts/KDf7d7oTEMY?feature=share
Here is the idle right now. This is with 37.5 pilot, AF turned out a 2 turns. Just experimenting.
I'll go back to the stock jetting but do a 21mm float level.
Yes the bike runs great but then after 10 minutes of riding with a long run of WOT is when it gets weak. I have some hesitation in the mid range if I snap throttle open too fast. I'll get the needle clip placed next but it's not really hindering my riding fun.
The float came stock at 26mm. I believe mikuni sheets say it's supposed to be 21mm but now I'm seeing the effect it has even with a few mm difference.
Last plug check it did it was almost good just a little on the lean side coloring
My clip is in the 3rd position, I reset it and the AF screw (to 1.5 out) every time I adjust a pilot or float level.
When I ride it sounds like I need to go to position 4 and it should take care of the hesitation. I've reprioritized to getting the idle tippy top.