|
I finally finished, I rode without making changes to 10 000 Rpm. max and capacity to 298, and checked on the computer what are the parameters later I uploaded again the same map, that is tuned and patch to 1000 Rpm. max and change the cylinder calculation to 298 the difference is that after starting the motorcycle for a moment is at 2200 Rpm. After that RPM drops to 1700 RpmEarlier it started warm and immediately had 1700 computer showed that after changing the capacity the RPM correction has decreased to 50-150 before uploading the patch it was over 200 which means that as I thought the lambda probe itself corrects the dose even after changing the cylinder, But if it burns, and in the map will not be entered in the system in the calculation table correct capacity, then probably the mixture will be very bad generally motorcycle can be easily put on 1 wheel only problem is that I ran out of 7th gear.
|