View Single Post
Old 10-24-2021, 11:26 AM   #34
tknj99   tknj99 is online now
 
Join Date: Oct 2020
Location: Central VA
Posts: 1,301
Quote:
Originally Posted by severely View Post
WOW, Thanks for the detailed replies to you and Plump Kibbles. Between the two of you I now have a great plan upon delivery. The CDI/coil setup and carb modifications {40 pilot, 115 main} will be on all the bikes before I even start them. I'll look at the other mods as necessary. One question, where is the boost bottle connected on the intake?
You will want to remove the EGR plumbing and then can use a thin metal bracket and cut and drill to block off the port on the side of the engine head. After you do that you will find that the intake manifold has a rubber hose line running to it.. this will be removed when you remove the EGR plumbing leaving an exposed port. I cut a short section of rubber line and then used a tire cap to cap that line.. basically that port sucks in clean air and is used by the EGR.
That port is what you will connect the boost bottle line to should you purchase one.
__________________
2024 Templar 250
2021 Beta 500 RRS
2018 VStrom 1000 XT

Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X, Storm DLX 150


 
Reply With Quote