ChinaRiders Forums - View Single Post - Hawk 250 ignition problem after fuse blown

Bird Fish · 02-23-2021, 07:15 PM

Hello fellow hawkers,
I broke my ignition switch and when hot wiring it I burned a fuse. I replaced the fuse but then bike wouldn't start. I also cut into the kill switch and the problem is not there. I ordered a replacement CDI on Amazon but am not sure they work and I broke my original CDI screwing around with it. Any tips?
Thanks

02-23-2021, 07:15 PM	#1
Bird Fish Join Date: Aug 2017 Location: SW Florida Posts: 16	Hawk 250 ignition problem after fuse blown Hello fellow hawkers, I broke my ignition switch and when hot wiring it I burned a fuse. I replaced the fuse but then bike wouldn't start. I also cut into the kill switch and the problem is not there. I ordered a replacement CDI on Amazon but am not sure they work and I broke my original CDI screwing around with it. Any tips? Thanks __________________ 2017 RPS Hawk - 15/50. Rear Foot peg delete. Horn Delete. Tank Bag. Airbox mod. NGK Plug. MSR Shifter. VM26 carb Jetted 120/17.5, middle clip, 1-1/2 turns.
	0