View Single Post
Old 09-07-2020, 11:08 AM   #10
Goob   Goob is offline
 
Join Date: Nov 2019
Posts: 353
Try adjusting the pilot jet screw

Quote:
Originally Posted by Zeke View Post
That seems to be my best bet right now.

I got it to start today but it just won't hold an idle. I can ride around as long as I am throttling. After I come to a stop or let go of the throttle it will drop and die. Any thoughts about my bike not idling? Still the carb?
Try adjusting the pilot jet screw. Typically should be between 1 1/2 to 2 1/2 turns out. This is a fuel jet (since it is on the intake manifold side of the carb) and a larger jet means more fuel. If you are at less than 1 1/2, then you need a smaller Pilot jet and if you are above 2 1/2, then you need a larger pilot jet.

I found I needed a 30 Pilot rather than the stock 20 to get a good idle.

This should get you to idle. The pilot jet works with the idle screw at closed to 1/4 throttle.
__________________
CSC TT250

Orion RXB 150XL


 
Reply With Quote