ChinaRiders Forums - View Single Post - Step by step how to dual shock conversion

Speckred17 · 03-24-2020, 05:55 PM

I did the dual shock mod on my Rhino. Huge difference. A word of caution, on the Rhino, you cannot insert a 4 1/2 inch bolt due to the sprocket on 1 side and the brake disk on the other. I solved it by using a bolt coupler in place of the spacer in the middle and a 2 1/2 inch bolt on the side with the sleeve spacer and 1 1/2 inch on the sprocket side. I also put an additional washer on both sides of the coupler in the middle so it would not pull through the mounts.

03-24-2020, 05:55 PM	#11
Speckred17 Join Date: Feb 2016 Posts: 47	Thanks for the MOD. Works Great I did the dual shock mod on my Rhino. Huge difference. A word of caution, on the Rhino, you cannot insert a 4 1/2 inch bolt due to the sprocket on 1 side and the brake disk on the other. I solved it by using a bolt coupler in place of the spacer in the middle and a 2 1/2 inch bolt on the side with the sleeve spacer and 1 1/2 inch on the sprocket side. I also put an additional washer on both sides of the coupler in the middle so it would not pull through the mounts.
	0