|
Adjusting the headlight on the Tao Tao Tbr7:
Remove front fender (4 bolts on the under side), once fender is off look up and under the light housing. You will see an 8mm bolt and a washer on a plastic slider track. Loosen and push the headlight in from the top, you will see the bolt slides toward your or to the front. Then tighten and put the fender back on.
I found the light to be 4 feet in front of me when it arrived, once adjusted I am getting about 15-20 feet on low beam and about 25ish feet on high beam
|