View Single Post
Old 12-10-2019, 05:44 AM   #7
acecase09   acecase09 is offline
 
Join Date: Nov 2019
Location: Jackson, SC, USA
Posts: 35
Update on the front brake. Scrubbing the pads and rotor with a brake cleaner and a bronze brush helped a LITTLE. It is still not what I should be. I started looking at the setup a little closer and I think I might be on to something. The 2019 has ABS front and rear with the ABS pump being somewhere under the tank. A quick measurement revealed that there is close to 7' of brake line for the front. I know the abs works on the back, and I have not decided if I want to keep it on the back, however with that much line on the front, that is a lot of line expansion to deal with. When I pull the tank to check the valves, I am going to measure for braided stainless lines and replace the ones on the front. It is a serious consideration right now to bypass the rear abs. There are many times when I need the rear tire to lock for controlled slides and stops. I will look into that and report what I find.
__________________
"If you make something idiot proof, the world will make a better idiot".


 
Reply With Quote