ChinaRiders Forums - View Single Post

Red Hawk · 10-14-2019, 01:03 PM

I had one of those. It was horrible excuse of a filter. They are used dry no oil ever, the face is dyed red just to confuse you. They don’t fit well too short so you’ll need a bent wire square shaped spacer to fill the gap. Way to restrictive on flow you’ll see. All the Amazon reviews aren’t great I thought my experience would be better.

I’d like to cnc a frame from plastic and glue in a UNI foam filter. I have the materials on had just no open time on the Machine. Winter project.

10-14-2019, 01:03 PM	#4
Red Hawk Join Date: Jul 2018 Location: NEPA Posts: 273	I had one of those. It was horrible excuse of a filter. They are used dry no oil ever, the face is dyed red just to confuse you. They don’t fit well too short so you’ll need a bent wire square shaped spacer to fill the gap. Way to restrictive on flow you’ll see. All the Amazon reviews aren’t great I thought my experience would be better. I’d like to cnc a frame from plastic and glue in a UNI foam filter. I have the materials on had just no open time on the Machine. Winter project. __________________ 2018 Hawk P&P Decked .040 off the head. 17/43 D.I.D. 428, NGK Iridium plug, DeCat, Wrapped pipe, Custom S.S. Muffler core, Nibbi PE30 115/35, L.E.D. Lights, Digital Cluster, USB port, Cutting Bord skid plate, Oil cooler w/ custom CRF oil filter inline, 5Wt fork oil, Rear Shock, CNC Back Rack, 30mm FAT bars, Bark Busters, ProGrips, Adjustable levers, Shinko 700’s lots of Loctite!
	1