Quote:
Originally Posted by detours
Tools Needed- 8mm socket - countershaft sprocket cover bolts
- 13mm socket - outside axle locknut
- 13mm open ended wrench - inside axle locknut
- 18mm socket - left side axle bolt
- 19mm socket - right side axle nut
- 30mm socket - countershaft sprocket nut
- Large flat blade screwdriver - countershaft sprocket safety washer
|
This is a fantastic tutorial, thanks for taking the time to write it up!
One thing I have to point out -- this was apparently written for earlier models; on my 2018 the countershaft sprocket nut requires a 32mm socket.