Quote:
Originally Posted by duck9191
My meter sucks but looks like .8ohm between the coils and 18vac, exciter coil read 270 ohms, 72vac. Going to grab a better digital meter tomorrow that can read capacitance and check the vreg.
|
Each output coil should be equal I think 70vac
Are there 3 on your system? I’ve not seen the AC CDI version you guys have etc
I assume you have 3 and each wire to earth about 70vac
Resistance between each wire equal etc and open circuit to ground
Think that’s about all I did to test my bike.
I’ve seen bad connectors at the plug near motor n at the regulator.
Test bolts at output of regulator too