06-05-2019, 07:41 AM
|
#15
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,581
|
Quote:
Originally Posted by bloverby
Yeah, seems like it's just an overall poor design. Looks like you could make a sheet metal bracket to move it in line with the chain or maybe even just trim off a few inches off the rubber ridge to the point where it lines up with the centerline of the chain to make it function better. Might order a new one to experiment with.
![](https://lh3.googleusercontent.com/l7cZSXynfSV-4lh0hpmL6vJtbX0LjijI3k7W_0eqTDnX-JUW8FbKAt2q-kelZVAtJeA2bUIUopZ-LMT-Mb6WXHmIpbLqJbQsLQkXsgSF-ELyqsw_NSggEy3FWUUqtsAEqdwECmDeGnHh8tS7TlFSJmRJDOn0zX2KpGyrnusWZWq9odHR-vwb-bUqBpAUZsr4POJ4NDuHkdS-E2VdNQQvfzUsw7KalgDqTYfQAMfxsmIWASbtHYVDVye-zrq5t0YJWlaqOMDZwhf1I3O49skXqMd6g6uNZi0IvKX7xGDyrxOteOHIhRiogKhnwTwi5tF6Be5kg8eKUfS3ySwguWjHr7YCyfuJ9kgMvMSk87R36bo5Gym_IHeMGemBvSvWtyCJumE14h7WlrutdlQtFYAy-DhLdeEbxOlDW81Emo2RWESLKvLYXppixdyQluELk3NtosdTD5kGqCL4QV6f1ARNfrTo7WH2tiaYOJm-0g7hFClzorsd0qg7lWhUgy-Yudb-8GnL-hjNX_wotAP4-TIZCx6AE2UDzsvGSkSqyYcTkIM-qbi4csrjWc11_rpVRfko_7WALg6pzy0FurONnS4ccZo7QIvX6Rpn4p0FV91pE0dFRD-jrY-SeL6waqoQx4HDC1PndMVLYPDl1j1SjJInMtK-6wYIwA=w352-h625-no)
|
I just cut the tab off were it bolts to the swing arm then pop rivet it in place to line up with the chain.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel
|
|
|