Thread: Engine rebuild
View Single Post
Old 04-20-2019, 12:26 PM   #10
Megadan   Megadan is offline
 
Megadan's Avatar
 
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
Quote:
Originally Posted by Kivi View Post
65mph = 110kmh on this pushrod engine on highway seems too much. I read somewhere that on this engines max speed for prolonged length of time is 80kmh. My bike fits into this frame - comfortable speed for the engine is about 60kmh, on 80kmh there are more noices, but kind of acceptable, and 100-110kmh I have driven it only for a few seconds, because I have bad feeling that the engine does not like it and it could blow.
There are plenty of guys on here that use our bikes at those kinds of speeds almost every day. for months or even years without issue. I guess it really just depends on what is considered prolonged, but mine survived an over 10 mile run at 60-65mph twice a day getting me to and from work. There are plenty of other guys here that run their bikes at those same kinds of speeds all of the time. There is a reason most of us that do use our bikes like this tend to gear them more like a road bike to try and bring the revs down. My last bike would sit in the low 6000rpm range at 60mph without the throttle having to be wide open, and do so quite happily for long periods of time.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331
2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1
2024 Royal Enfield Shotgun 650
https://chinariders.net/showthread.php?t=34124


 
Reply With Quote