Quote:
Originally Posted by NzBrakelathes
What dash are you using? Blue with white on Hawk motor is the + side of the pick up down by the stator - maybe you got the wrong wire from donor engine/loom?
If 1 cyl it should be fine and double speed kinda makes no sense in my mind as 4 cyl should halve the rpm.
What 2 wires you got coming from stator area? 1 is ground for pick up and 1 is signal thats the one you want assuming the dash wants that signal not the coil +wire signal - there is a difference
|
I tapped the charge circuit pre regulator, through a zener. It fires once per revolution.
I plan to use a tiny arduino to read the pulses and supply one for every 2 to the tach.. Someones allready done to te coding for it the the little duinos are a couple bucks now. so should be a fun cheap little project.
I did document the suspension work, it all here somewhere, the forks and rear suspension are 1984 xr350. All Balls Racing can help you with a set of bearings to adapt many different forks to many other bikes.
Very handy.