Quote:
Originally Posted by Megadan
The hole is a good idea. I used RTV and a pair of tubing caps in place on the tubes at the rear on my last bike and I am planning to do the same on this one once I measure the diameter again.
Example of the end plugs. https://www.amazon.com/Pack-Round-En...0Z8ZXS1KW6SK6B
You might be able to find something similar at a Hardware store.
|
Maybe a pic as well that is not zoomed in 4 inches away from location lol
Dan, Could you explain exactly where water intrusion is located & where to access the hole to be plugged & hole to be drilled if so desired. Thank you.