ChinaRiders Forums - View Single Post

Angus67 · 12-10-2018, 12:05 AM

Stumbled on this old thread i started,.
Poor little guy sat outside all summer, and got blasted by sun, pelted by rain. Dragged the little quad in and put in new starter, new carb. Pretty much fired right up.
Im trying to hook up a relay for the starter.
Should there be 12v on the yellow/red wire fron starter button?
Can i just use a momenttary high amp button that is wired to the starter from the batter,and just bypass the original start button?
The kill swich works. Started button shows continuity. Were does the opower for the starter button come from?
It is charging. All systems are goog.

12-10-2018, 12:05 AM	#9
Angus67 Join Date: Oct 2017 Location: shelton, Washington Posts: 167	Stumbled on this old thread i started,. Poor little guy sat outside all summer, and got blasted by sun, pelted by rain. Dragged the little quad in and put in new starter, new carb. Pretty much fired right up. Im trying to hook up a relay for the starter. Should there be 12v on the yellow/red wire fron starter button? Can i just use a momenttary high amp button that is wired to the starter from the batter,and just bypass the original start button? The kill swich works. Started button shows continuity. Were does the opower for the starter button come from? It is charging. All systems are goog. __________________ 2006 roketa 200cc 1971 Yamaha xs650 2x 1980 xs650, 1 is a café, other is a chopper/brat 1972 Honda xl250 2x early 90's Honda rf600 parts bikes more mc junk laying around.
	0