Quote:
Originally Posted by Bruces
My old eyes don’t show me if that is how yours is hooked up ,but a lot of the atv Plow s mount from the rear hitch ,and have two long tubes under the atv with the Plow attached on the front .That should help with the weight .
Have you checked your attack angle ?should be around 70degrees on a level surface on the ground .
|
Hi Bruce, The mounting plate is welded onto the bottom of the lower frame about the center of the machine. The tubes of the plow told me how far back I had to mount the plate with leaving enough room to angle the plow all the way. Yes, I plowed at 70 degrees for the long pushes & straight for the "clean up" short pushes.