Last night I started the process of swapping out the left-side multi-switch (turn, high beam, etc). What a pain in the butt. The connector is under the tank. So it's installed, and today I need to bolt the bike back together. While I was in there I did the coolant overflow tank swap (great deal on that from Tako), and installed a new clutch lever perch because mine was worn enough for the lever to be really sloppy. I guess I should go ahead and do the fuel sensor level tweak, because mine starts to flash when it's still got two gallons in it. And I just realized that I should put in a new 12v to USB converter so the phone will actually charge while running nav, rather than just kind of hold where it is. Hope I still have one laying around.
|