Hi,
Quote:
Originally Posted by NzBrakelathes
Would that have full oil pressure?
|
Oil pressure sensor is installed in the right crankcase cover, there's an oil pasagge coming from the oil pump to the right end of the crankshaft. Full oil pressure there. The small oil screens are on the intake side of the oil pumps, at the bottom of both oil reservoirs (front and back), so no oil pressure there.
Some pics of my installation.
I used an automotive type oil pressure sensor, it's a universal fitment for many VW models, working pressure = 0.3bar. Straight 10mm thread (no NPT), but the area where it's installed seems to be flat and nice, almost like it was prepared beforehand to have the sensor there.
Also when working on this, it's a good time to check or better, replace, the oil seal (
https://store.cscmotorcycles.com/OIL...-p/z13-121.htm) wich manages the oil sent to the inside of the crankshaft.