|
Installed the centerstand on my 2018. I found one difference from the CSC tutorial. One end of the shaft had a washer bolted/screwed to it's end ( which the tutorial didn't show ) and the circlip grooves at both ends plus it came with 2 circlips. So I put a circlip on the end with the washer and found that the shaft didn't expose the groove at the other end. So I removed the first clip and relied on the washer at that end and the clip at the other. I hope this is OK, maybe somebody from CSC can chime in. I also read about the coin trick for the spring installation either here or somewhere else, 8 to 10 dimes jammed in and the spring just needed a little help to get over the peg, excellent tip.
Next is the 12V/USB kit this afternoon. I'm noticing there is one less part than shows in the tutorial - the resistor that installs under the seat, maybe it's already installed on the 2018. I'll check when I do the installation. Also on tap is my first oil change as I just hit the 200 mile mark.
|