ChinaRiders Forums - View Single Post

DaveinOC · 09-23-2018, 07:33 AM

I found that you need to run a tap down those sprocket holes. I'm not sure if they are full of locktite or were never threaded well but after doing that the CSC supplied bolts threaded smoothly with both spacers. I mentioned it in this thread post #3:
http://chinariders.net/showthread.ph...ear#post287184

09-23-2018, 07:33 AM	#4
DaveinOC Join Date: Jun 2018 Posts: 27	Run a Tap Down Thise Threads! I found that you need to run a tap down those sprocket holes. I'm not sure if they are full of locktite or were never threaded well but after doing that the CSC supplied bolts threaded smoothly with both spacers. I mentioned it in this thread post #3: http://chinariders.net/showthread.ph...ear#post287184 __________________ 1978 Husqvarna 250 WR 1991 Husqvarna WXE 250 2018 CSC TT250
	1