Quote:
Originally Posted by RedCrowRides
Wlfpck - Post a link to the exhaust source please ,we are trying hard to compile a list of exhausts known to fit the Clones with little to no modification required, and this low mount would seem to be perfect .Thanks!
|
Exhaust that I used...
https://www.ebay.com/itm/Stainless-S...75.c100623.m-1
In terms of exhausts that will fit...
https://www.motorkit.com/en/5677-exhaust-onder?p=1
Most in the link above ^^^^ should fit. The one that most people use with the ZS190 is this one below:
https://www.motorkit.com/en/down-exh...sting-gp1.html
If you use the AR Aodonly exhaust...
Either you have to bend the exhaust piping to account for the angled exhaust port, or... weld in a 1 to 2 inch extension to have the exhaust pipe drop low enough.
Anyways... to find an exhaust you want... search for Honda Dax, Honda Z50, or Honda Monkey exhaust. As long as it's a low mount exhaust... it should fit (no promises). If you want a high mount... you'll have to test it out.
Reason for this is because the clone engines are based off the Honda CRF50 engine design. So the exhaust port is at an angle instead of straight down like the Grom and the SSR Razkull.