Quote:
Originally Posted by JerryHawk250
At this point it looks like you will be replacing the cylinder and piston. Besides the damage I seen in the pictures. I see one reason why it didn't start. Plug tip took a beating. If you clean it out real good and it still has good compression and no scaring of the cylinder, try putting a new plug. It might run as is. You can always go with a big bore kit.
|
I agree with JerryHawk
I have seen worse run just fine. If the exhaust valve seat is not beat up it should run good with the old parts. I have had glow plugs go through a cylinder and out the exhaust and the engines were fine. I would remove the exhaust valve and give it a look though.