04-06-2018, 03:26 PM
|
#21
|
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,574
|
Quote:
Originally Posted by Megadan
^this. I don't have the link to the PDF file on hand, but there is one floating around this site somewhere. Or somebody will link it sooner or later.
You may need to order a tool or two if you don't already have them.
To get the oil spinner and clutch apart you will need one of these guys.
https://www.amazon.com/Locking-Remov...mm+clutch+tool
You will see a nut with 4 notches cut out of it, that is where this tool comes into play.
Also, before you try splitting the cases the cylinder head and cylinder will need to be removed. Just keep that in mind. |
And if you don't want to order and wait for the tool you can make one from an old socket with a grinder. The older manual I emailed you even shows how to make one.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel
|
|
|
|