View Single Post
Old 03-30-2018, 07:44 PM   #4
Arcstriker29   Arcstriker29 is offline
 
Arcstriker29's Avatar
 
Join Date: Mar 2018
Location: New Hampshire
Posts: 34
Quote:
Originally Posted by KingMiniKatt View Post
That is interesting to note about the front sprocket I purchased a 17 tooth and a 13 tooth for either top end or for stunting but if it does turn out to be a 16 i will try it out.
I Plan on changing the oil as soon as i get the bike and after about 50 to 75 miles change it and while the oil is out might as well crack the cover off it and put in HD Clutch springs
What kind of horn are you planning on using?
I as well am not expecting a Grom quality bike but i plan on changing alot of the bike slowly but surely so it seems to be a perfect cheap candidate as a bike to modify to your wishes thats the way i see it.
THANKS FOR ALL THE HELP AND FAST REPONSE!
Okay, lol I've been busy with add-on's but so far what I've done:

I got rid of the stock "scooter" mirrors, I was going to go with end bar mirrors, but found some descent mirrors with the LED turn signals in them.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I got rid of the stock carb which didn't let the bike idle well once warmed up, but it came with a 25mm carb HOWEVER, the air tube from motor to carb was still only 19mm so I replaced it all with a 26mm Carb and air tube, got rid of the air box and the Carb I got came with a air filter... Sounds a LOT better and runs a LOT better. if you do swap out the carb, I had to use my stock throttle spring in the top of the carb, but the new needle, and top cap, otherwise throttle cable was too short or too long to even adjust, but works great with that setup. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1


I ditched the rear fender, and bought a $69 (Amazon) rear fender eliminator bracket that came with smaller turn signals and will use your stock plate light, looks nicer. But the kit uses bigger bolts than the stock bracket, the bolts on the shipping frame fit perfect. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I have the 17mm sprocket in now, but I just got a 18mm sprocket I'm going to try out...

I did add a horn, sounds a little bit more like a small car, but better than stock, doesn't play music or anything fancy lol
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1


I'll try to get some pics up. its a busy time for me at work for the next few weeks and weather will be crappy, but soon I plan on posting some YouTube videos of the mods, how to's and the differences they've made... I posted links to the few things I got at amazon, hope the links work...


 
Reply With Quote