ChinaRiders Forums - View Single Post

Angus67 · 02-25-2018, 05:25 PM

Been a couple weeks. Waiting for a 27.5 for my bike.
Today i replaced the inner tube in the front with a hd irc. The tube that was in it wasnt stock, and the rimstrip said made in chine, so someone has been in there before. Picked up three tire irons yesterday at harbor freight. 5$ each. Its not that hard. Although, i did reuse the og tire, so its worn stretched a little. Lots of baby powder, new rim strip, no proad spokes. I almost put arm power to one iron and realized it would pinch the tube. Its holding for now at 28 psi. Ill check it again tomorrow. I als had a couple fanny packs laying around and lashed on to the front and one to the rack. Also wired in a tail light from a 1979 xs650. .
Ya, the more i look over this bike, the more i realize that it is what it is. A cheap knockoff, but that doesnt mean it has to be a throw away piece. You get what you put into it.
Through the years ive seem some production welds that were very questionable. Beings that im a welder bike trade, i just grind out the offending weld, and do it again.
Maybe this is my christine? (Steven king movie)
Its not terrible. Ive had a 72 honda xl 250 for a few years, and that bike is. A. Tank. And powers thru anything, but its a heavy bike compared to this roketa..
I see no broken welds, sure, some of the gussets and frame stiffeners are ill fitted, but what do you expect?
I like that its a cheap bike, cheap parts. I just buy higher quality parts where the n matters in safety and performance.
Heres pics

02-25-2018, 05:25 PM	#1
Angus67 Join Date: Oct 2017 Location: shelton, Washington Posts: 167	Rehab roketa update Been a couple weeks. Waiting for a 27.5 for my bike. Today i replaced the inner tube in the front with a hd irc. The tube that was in it wasnt stock, and the rimstrip said made in chine, so someone has been in there before. Picked up three tire irons yesterday at harbor freight. 5$ each. Its not that hard. Although, i did reuse the og tire, so its worn stretched a little. Lots of baby powder, new rim strip, no proad spokes. I almost put arm power to one iron and realized it would pinch the tube. Its holding for now at 28 psi. Ill check it again tomorrow. I als had a couple fanny packs laying around and lashed on to the front and one to the rack. Also wired in a tail light from a 1979 xs650. . Ya, the more i look over this bike, the more i realize that it is what it is. A cheap knockoff, but that doesnt mean it has to be a throw away piece. You get what you put into it. Through the years ive seem some production welds that were very questionable. Beings that im a welder bike trade, i just grind out the offending weld, and do it again. Maybe this is my christine? (Steven king movie) Its not terrible. Ive had a 72 honda xl 250 for a few years, and that bike is. A. Tank. And powers thru anything, but its a heavy bike compared to this roketa.. I see no broken welds, sure, some of the gussets and frame stiffeners are ill fitted, but what do you expect? I like that its a cheap bike, cheap parts. I just buy higher quality parts where the n matters in safety and performance. Heres pics Attached Images __________________ 2006 roketa 200cc 1971 Yamaha xs650 2x 1980 xs650, 1 is a café, other is a chopper/brat 1972 Honda xl250 2x early 90's Honda rf600 parts bikes more mc junk laying around.
	3