Took the frame to the welder today to check the welds and straighten the foot pegs. In the interim I decided to start on the seat.
The stock seat suffers from poor quality foam and the obnoxious hump. I'm also going to make it a bit wider in the hip area.
Phase 1, remove cover, cut stock foam, measure and cut 6lb carpet pad to fit cutout. Glue in place and rough shape with knife. Need a sharpie a serrated edge knife, scissors and spray adhesive.
__________________
Mark
2015 Haosen Hawk 250
2014 CRF250L
2014 CB500X Rally Raid
|