[FLASHLIGHTBOY]

yes the hand brake and the foot brake are all tied in to one system.. the foot brake plastic switch has a lock nut to set the brake light to come on when applied.... I always put a big gob of silicone on the threads and nut to make it secure .. then it does not come out of adjustment.. if it has a remote start they draw power ( but not enought to drain in 10 mins) Take your stock battery to a place ( have it charged up) an d have them load test it.... it has a small capacity on it.. if it is a 12v 4 .. about 50 amps.. the 5 has a little more.. 12v 9 has about 100 amp.. ( these are rought figures) get a bigger amp battery you can just measure your opening.. you can always check the charging from the regulator.... I do not know how to check amperage on the atv... just know how to check voltage with ohm meter ... maybe some one out there can tell how to check amps.. ok..