ChinaRiders Forums - View Single Post

Robertk · 08-05-2017, 04:15 PM

Well i took the mikuni off. and opened the factory carb up. Put a 120jet and 2 3/4 turns on the air/fuel needle also 2 washers under the main jet needle and put it on the bike. It now runs great. The problem was the mikuni vm26.

08-05-2017, 04:15 PM	#9
Robertk Join Date: Aug 2017 Location: Iowa Posts: 5	Well i took the mikuni off. and opened the factory carb up. Put a 120jet and 2 3/4 turns on the air/fuel needle also 2 washers under the main jet needle and put it on the bike. It now runs great. The problem was the mikuni vm26.
	2