Quote:
Originally Posted by Coloradogoose
Still in the process of getting my KLR ready to sell, so not quite ready to order, but wanted to check if there was a final word on this. I'll be using a rim I already have so as long as I have a way to reference the front hub measurements when ordering I should be good. Thanks!
|
Yes, I called Buchanan's and they verified the spoke specifications. I don't know if other spoke manufacturers employ the same method of measuring spokes, or if this method is unique to Buchanan's.
However, if you send these specifications to Buchanan's, they will make custom spokes for you which will lace a 21-inch rim to the RX3's front wheel.
'Gauge' is the diameter of the wire used to manufacture the spoke.
Gauge: 10
The 'neck' is the length measurement of the spoke taken from the head of the spoke to the bend of the spoke.
Neck: 1/2 inch
The 'length' measurement is taken from the bend of the spoke to the end of the threaded portion of the spoke.
Length: 8-15/16 inch
The 'bend' measurement is the angle the head bends away from the major length of the spoke.
Bend: 25 degrees
Gauge: 10
Neck: 1/2 inch
Length: 8-15/16 inch
Bend: 25 degrees
I am going to ask Buchanan's if these spoke specifications are stock for the front wheel of another motorcycle.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894