Quote:
Originally Posted by Azhule
If the oil is old... drain it out... refill with the proper amount of new oil... tip the bike over and lay it down on the right side (clutch pack side)... let it set over night
This usually helps get the clutch plates properly soaked again without having to take everything apart
|
Azhule, I officially have a man crush on you! Laid it down on the right side before I left for work this morning. Got home a little bit ago, and righted her and fired her up. I let her run for 5-10 minutes at a high idle (I need to adjust the idle down still) until everything got nice and warm, then turned her off. I put her in gear and rocked her back and forth with the clutch in and at first nothing, but after a minute of so of rocking, it popped and started rolling freely! After dinner I'm going to take her for a little spin. I also adjusted the idle down since everything was nice and warm.
